How to Clean Your Hard Drive with SURERASE

SURERASE Pro Instructions

 

1. Insert the SurErase CD

2. Turn your system off and then turn it back on.

Your system should boot from the SurErase CD. After a few minutes, the SurErase splash screen and then the SurErase license agreement should appear. If you do not see the license agreement after several minutes, please ensure that your system is configured to boot from a CD if it is present. You can learn more about how to configure your system to boot from the CD here.

3. Review and accept the SurErase License Agreement by following the on screen instructions.

4. Insert the SurErase USB Key when prompted to do so.

5. Read each prompt and take the appropriate action to begin the erase. The process will take from one to several hours depending upon your system, the number of devices to erase, and the size and speed of the devices.

6. After the erase is complete, you will see a SurErase a SurErase Operations Summary. When prompted to do so, press <Enter> and WAIT for SurErase to complete processing.

7. When SurErase has completed, you will be prompted to remove the SurErase USB Key and SurErase CD. Remove both devices and turn the system off.

8. You can now safely proceed with registering your results and printing your reports.

If you still have problems, please contact customer support and we’ll do our best to help you out.